SUNPOWER YACHTS 44 – VIP MASTER – 2022 – AUCTION

Ray White Marine will be hosting an Auction at 11am on Saturday 9th December 2023 at Marina Mirage, Gold Coast, Australia.

For full specifications and more information, please contact:

Jackson Legge on +61 420 322 262 or jackson@raywhitemarine.com

1. GENERAL INFORMATION

The following technical specifications (“Specifications”) describe the technical construction elements of the SUNPOWER YACHTS 44 in detail.
All components are marine grade and have a CE certificate.

2. MAIN TECHNICAL CHARACTERISTICS
Dimensions and capacities
Design & naval engineering Sunpower Yachts Australia Pty Ltd
Concept and innovation Sunpower Yachts Australia Pty Ltd
Length overall 13.40 m 44.0´
Length waterline 13.00 m 42,7´
Beam overall 7.20 m 23.6´
Draft 0.750 m 2.5´
Slenderness ratio (Lwl/Bwl) 8.6
Light displacement (EC) 11 t 24,250 lbs
Fresh-water 2 x 250L = 500L 2 x 54.992 gal (US)
Waste-water 1 x 500 L 1 x 54.992 gal (US)
Fuel 1 x 250 L 1 x 54.992 gal (US)
Standard motors Electric 2 x 20 kW e-motors

*) Light displacement and performance predictions subject to change due to specification of vessel.

Engines and Performance

a) 2 x 20kW high efficiency motors
b) Cruising speed 4-6 knots, top speed approx. 10 knots
c) High-efficiency propellers on shafts
d) Engine controls and control panels at inside and outside helm
e) Access to engine- / technical-compartments via cockpit hatch
f) Engine-compartments ventilation: natural aeration and forced extraction
g) Generator-, engine- and technical compartments sound protected

ELECTRONICS
Saloon Helm
a)Raymarine Axion 9
b) Raymarine radar
c) Muir anchor winch counter
d) Fusion marine stereo system surround sound saloon and aft deck
e) Fusion marine stereo remote control
f) ICOM VHF marine radio
g) Water tank meters
h) Yacht battery power meter
i) Yacht electric emotor battery power meter
j) Luxo tv power lift remote control
k) Horn
j) Light switches
l) Craftsman bow thruster controller

Superstructure Helm
a)Raymarine Axion 9
b) Muir anchor winch counter
c) Craftsman bow thruster controller

3. CONSTRUCTION CHARACTERISTICS:
a) Hulls are Light weight and flexible Western Red Cedar laminated with quadriaxial e-glass and West System Epoxy. Western Red Cedar is dimensionally stable, lightweight with high strength, has insulating properties to reduces hull noise, and is resistant to decay.
b) Engineered laminated solid timber keel and a reinforced laminated collision bow section in each hull
c) Reinforced high-density foam core composite bonded with epoxy resin for strong and lightweight structure
d) High quality and osmosis free Epoxy resin with high interlaminar shear strength
e) Sophisticated highly torsion resistant hull and bulkhead structure
f) Watertight bulkheads, sealed floor-sections and collision-compartments for ultimate safety
g) Foam core structure bonded with e-glass acts as thermal and sound insulation within the yacht
h) Interior furniture acts as reinforcing light weight structure
i) Complete boat in gloss polyurethane painted finish
j) Built as standard in accordance with CE regulations. USCG on request.

4. EXTERNAL LAYOUT STANDARD AND FITTINGS

Transoms
a) Shower (H/C) in starboard transom
b) Inox handrails
c) 1 swimming ladder at transom step
d) l-bench at the salon-wall with a U cockpit seat and table for 6-8 persons
e) All voids are accessible for ropes, fenders, cushions etc.
f) Built in Stairs to flybridge
g) Electric tender lift
h) Tender 2.9m islander
i) Torqueedo outboard 1103

Engine- / Technical Compartments
a) Access through liftable hatches
b) Sufficient space for generator and all other technical components
c) Space for watertoys etc. (only on “standard”-version)
d) Watermaker Seawater Pro 50Hz motor
e) Hotwater system

Foredeck
a) 2 deck-hatches for access to forward storage-compartments
b) 1.200 W electric windlass (8 mm chain)
c) Composite day bed areas for up to 4 guests, with 2 x round composite tables/ drink holders with stainless rims.
d) day bed cushions only

Flybridge
e) Port helm console for engine controls and navigation equipment
f) moulded L-shaped sofa with table
g) sun-beds
h) Fixed solar-roof (optionally retractable)

Deck fittings
a) 8 mooring cleats total (2 x swim deck, 2 x stern, 2 x mid-ship, 1 x bow on each hull)

Exterior decoration
a) Sunpower Yachts logo on sides of coach roof

5. INTERIOR DECORATION AND FITTINGS

Layout Version

a) OWNERS VERSION
3/2: 1 VIP-Master cabin in the front starboard with full length ensuite includes twin vanities in hull with office desk, port-side 1 guest-cabin with two single bunks shared ensuite, port-side 1 guest-cabin with double bed shared ensuite, (= 3 cabins one with double that sleeps 3, 2 bathrooms) Sleeps 7

Electricity
a) Fuses and interrupters for 12, 24 and 48 V DC and 230 V AC (US Version 110 V) (AUD Version 240 V)
b) All wiring with tin-coated copper cables of marine grade
c) All cables labelled and numbered and mounted on rails
d) All lights high quality LED
e) Main switchboard for battery level, fuel-, water- and blackwater-levels, navigation lights
f) Shore-power connection with fuse

General Interior

a) Headroom in the cabins, bathrooms and corridors 2.00 m
b) Headroom in the front-cabin 2,00 m, front-cabin bathrooms /walk-in-closet 2,04 m
a) Headroom in the saloon / kitchen: 2.09 m
b) Large portlights in all cabins
c) Natural aeration and forced aspiration-system in all cabins / bathrooms
d) Interior furniture built in lightweight materials covered with veneers
e) Thermal insulation for excellent room climate
f) All walls painted or covered with vinyl leather or optional materials
g) Standard interior with mix of modern range of veneers with white lacquered surfaces and colored floors.
h) All cabin- and bathroom doors in light weight material, high quality, soft closure
i) Door-locks with high quality “anti-rattle” mechanism, all drawers soft closure
j) Port lights and deck hatches in “flush deck” design and CE approved
k) All steps with anti skid surface, Hella LED courtesy-lights

Salon

a) Vast panoramic saloon inside of ~ approx. 20 m² – headroom: 2 m
b) Sliding saloon door and sliding window– opens at full saloon-width
c) Sliding window on the port side
d) Sliding door and sliding windows transform the closed saloon into an open cockpit-area
e) Hella LED lights

Inside Helms-Position and Chart Table
a) Helm-position with steering, engine-controls and -displays, compass
b) Large instrument console for electronic equipment
c) 2 x 230 V (US 110 V) socket, 2 x 12 V sockets
d) Helms-seat for one person (~120 cm wide)
e) 360° view from the helms-position
f) Vast storage underneath with long drawers

Saloon Lounge Area
a) “U” shaped sofa with comfortable cushions, could serve as bed
b) Dining table for 6 persons
c) Samsung TV 42 inch with hydraulic electric lift

Kitchen/Pantry
a) “U” shaped kitchen Port and “L” shape kitchen Starboard with acrylic stone worktop
b) Sink twin tub in stainless steel
c) 230 V (US 110 V) (AUD 240 V) sockets on the worktop
d) Bosch Induction cook-top (4 plates)
e) Bosch oven / grill
e) Fridge Samsung side-by-side doors fridge/ freezer lower draw

General Cabins

a) 1 large double bed or 2 single beds bunks lower double bed/upper single bed.
b) Maritime mattresses in PU-foam with varied densities for greater comfort and restful sleep (140 mm thick), anti-mite, anti-fungus, antibacterial, hypoallergenic
c) Storage under the bed, accessible from the side or from the top
d) Hanging lockers and lockers with shelves, storage boards (depending on version)
e) 2 x 230 V (US 110 V) ( AUD 240 V)sockets, 12 V and USB socket
f) LED-ceiling-lights and reading lights back side of the bed

g) Front VIP-Cabin – Additionally to the above mentioned features
h) Full-width cabin > approx. 1980mm wide
i) 2 large double bed approx. 1500mm x 1980mm with side access.
j) Vast storage area on the bridgedeck alongside the bulkhead
k) Bathroom on port-side with large vanity-table, large shower and 230 V plugs (AUD 240 V)
l) Walk-in locker on starboard with extensive hanging lockers, desk, large mirror and lockers with shelves

Bathrooms
a) En-Suite Bathroom in “Version 3 VIP”, “Version 3/2”
b) Sink / basin with mixer tap (H/C)
c) Locker under / above the sink / basin and other locker for various items
d) Upper cabinet with mirror
e) Non-skid flooring
f) Accessories like towel holder, soap-dispenser, paper-holder
g) Electric toilet
h) Separate shower (H/C) with acryl door in each bathroom
i) Storage-shelf and seat in shower
j) (230 V EURO) (AUD 240 V) (US 110 V) socket
k) LED spotlights

Master Bathroom (in the 3 VIP-Cabins version)

LAUNDRY
a) Bosch 8kg washing machine
b) Sink / basin with mixer tap (H/C) side cupboard and above head storage cupboard

Additionally, to the above-mentioned features

a) Generous bathroom
b) Large “king-size” shower
c) Large twin-sinks / basin
d) Additional mirror and lockers

6. STEERING SYSTEM
a) 2 rudder blades with stainless steel rudder shaft
b) Epoxy tube for rudder bearings
c) Self-aligning upper and lower bearings
d) Hydraulic steering system

7. ENERGY PRODUCTION AND STORAGE
a) 24 high-efficiency solar-panels with ~9.6 kWp in total for propulsion and household
b) MPPT solar charge regulators
c) Lithium Batteries 48 V, 80 kWh
d) 22.5 V service batteries with 50 A charger
e) Charger 60 A for 25.2V Batteries
f) Inverter 5 kVA – sufficient for all standard household appliances
g) Charge-, consumption- and capacity controls for all electric circuits

8. FRESH WATER, BILGE AND SEWAGE SYSTEM
a) All hoses and pipes are marine grade
b) Fresh water: – 2 x 250 L = 500L fresh water tank
– Fresh water circuit including pressure pumps
– electric boilers for all showers / sinks
– 1 x hand shower on stern platform (C) on request (H/C)
c) Waste water: – 1 x waste water tank 2 x 250L with electric pump.
d) Drainage circuit: – Self-draining cockpit as per CE standards
– Automatically activated electric bilge pump in each watertight compartment

9. SAFETY AND REDUNDANCY
a) watertight bilges per hull
b) Hermetically closed compartment at the bow bottom
c) Oversized electric bilge pumps + additional manual bilge pumps for double safety, all vital
systems are redundant